smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint T166 series Device Model: SAMSUNG HD501LJ Serial Number: S0MUJ13P670513 Firmware Version: CR100-10 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Tue Apr 14 17:43:36 2009 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (8814) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 150) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 253 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 015 Pre-fail Always - 7168 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1157 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8614 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 603 187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 917517 188 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 063 058 000 Old_age Always - 37 194 Temperature_Celsius 0x0022 127 112 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 31988 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 10 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 12 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12 occurred at disk power-on lifetime: 5684 hours (236 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 08 a7 8f 3a e0 Error: AMNF 8 sectors at LBA = 0x003a8fa7 = 3837863 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 a7 8f 3a e0 00 13:12:54.563 READ DMA ec 00 00 00 00 00 a0 00 13:12:51.688 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:12:51.688 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 13:12:51.688 IDENTIFY DEVICE Error 11 occurred at disk power-on lifetime: 5684 hours (236 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 08 a7 8f 3a e0 Error: AMNF 8 sectors at LBA = 0x003a8fa7 = 3837863 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 a7 8f 3a e0 00 13:12:51.625 READ DMA ec 00 00 00 00 00 a0 00 13:12:48.750 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:12:48.750 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 13:12:48.750 IDENTIFY DEVICE Error 10 occurred at disk power-on lifetime: 5684 hours (236 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a7 8f 3a e0 Error: UNC 8 sectors at LBA = 0x003a8fa7 = 3837863 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 a7 8f 3a e0 00 13:12:48.625 READ DMA ec 00 00 00 00 00 a0 00 13:12:45.813 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:12:45.813 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 13:12:45.813 IDENTIFY DEVICE Error 9 occurred at disk power-on lifetime: 5684 hours (236 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a7 8f 3a e0 Error: UNC 8 sectors at LBA = 0x003a8fa7 = 3837863 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 a7 8f 3a e0 00 13:12:45.688 READ DMA ec 00 00 00 00 00 a0 00 13:12:42.875 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:12:42.875 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 13:12:42.813 IDENTIFY DEVICE Error 8 occurred at disk power-on lifetime: 5684 hours (236 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 a7 8f 3a e0 Error: UNC 8 sectors at LBA = 0x003a8fa7 = 3837863 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 a7 8f 3a e0 00 13:12:42.750 READ DMA ec 00 00 00 00 00 a0 00 13:12:39.875 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:12:39.875 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 13:12:39.875 IDENTIFY DEVICE SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.